zaterdag 26 januari 2013

Raspberry Whispers

On the interesting Blog of M0XPD is a very interesting article about WSPR experiments with the RPi.
Read the article: Raspberry Whispers by M0XPD.

I just visited the WSPR data base to collect a list of WSPR spots. And made an Analysis of the WSPR spots that M0XPD made on 30 meter with a power of 200 mW.

The stations that are mentioned in the article Raspberry Whispers have Excellent Ears. (Sensitive receivers)  The lower the Calculated Field strenght  in the better the propagating or the more sensitive the receiving station.


WSPR Analysis
The distance is given in steps of 100 kilometers.
A distance of 250 to 349 km will show up as 300 km.
PI4THT at a distance of 635 km, is placed in the category 600 km.

To compare spots, that are made with a different power (dBm), I calculate the lowest possible power of each spot, using the SNR and the power (dBm) of the transmitting station.

To compare the spots of stations at a different distance, I calculate the Field strength of each spot. This calculation includes the distance in km. In the table, I chose for microVolt/meter, to get nice values.

For one receiving station, the changes in Field strength follow the changes in the propagation to that station.

  • The lower the Field strength, the better the propagation.
While comparing two receiving stations:
  • The lower the Field strength, the more sensitive the station. 

The RPi is working well.


2 opmerkingen:

  1. Een beetje in de trend wat je voor mij gemaakt hebt Bert. Alleen hier kan je heel mooi zien dat de propagatie op een bepaald punt op z'n maximum is. Dat is natuurlijk zeer interessant voor bijvoorbeeld een contest als de PACC. Zo kun je zien wanneer een bandwissel meer punten op kan leveren. De gunstigste tijd voor die bandwissel moet je dan een dag van te voren bepalen. Daar is ook natuurlijk niet alles mee gezegd, want net zoals het weer is propagatie veranderlijk. 73, Bas

    BeantwoordenVerwijderen
    Reacties
    1. Hallo Bas, In contesten waarin ik het laagst mogelijke vermogen gebruik, graas ik gewoon de ene na de andere band af.
      In de PACC geef ik CQ en en draai daarnaast ook af en toe over de band, om de sterkste stations met QRPpp (<100mW) werken.
      Ik denk dat je echt, van een spread sheet gebruik zult moeten maken, om een zinvolle analyse te maken. 73, Bert

      Verwijderen